The CHH 175 is a CSA/UL certified system that is designed to operate on multiple fuel sources. As a fuel-burning appliance, it is designed to heat fluid “on demand” and provide pumped circulation of the fluid for use in various portable hydronic applications. This unit provides a central source of hot “heat transfer fluid” (HTF) for use with dependent heat exchangers such as:
- Fan coils for heating and drying of structures or commodities such as grain lumber or hay.
- Explosion proof fancoils for use in hazardous locations
- Multi-circuit line heat exchange hose or tubing for ground thawing, concrete curing, snow melting and slab heating
- Helical heat transfer coils for heating large tanks and reservoirs of water or other various liquids
- Plate heat exchangers for heating various contained liquids or extending upward capability in high rise buildings
- Custom hydronic heat exchange accessories and applications
The CHH gas-fired units can be equipped with either of 2 burners: one is dedicated for natural gas and the other for propane gas. Pumping and combustion control is achieved with electrical components and requires a 115 volt, 15 amp, 3 wire grounding circuit and is designed for consistently efficient outdoor operation.
| CHH 175 CAPACITIES | Diesel | Propane | Natural Gas |
|---|---|---|---|
| Heat (at specific conditions) | Up to 250 000 cubic ft | Up to 250 000 cubic ft | Up to 250 000 cubic ft |
| Thaw | 4,000 sq ft (2,000 ft hose) | 4,000 sq ft (2,000 ft hose) | 4,000 sq ft (2,000 ft hose) |
| Cure | 6,000 sq ft (2,000 ft hose) | 6,000 sq ft (2,000 ft hose) | 6,000 sq ft (2,000 ft hose) |
| Frost Prevention | 4,000 sq ft (2,000 ft hose) | 4,000 sq ft (2,000 ft hose) | 4,000 sq ft (2,000 ft hose) |
The CHH 300 is a CSA/UL certified system that is designed to operate on multiple fuel sources. As a fuel-burning appliance, it is designed to heat fluid “on demand” and provide pumped circulation of the fluid for use in various portable hydronic applications. This unit provides a central source of hot “heat transfer fluid” (HTF) for use with dependent heat exchangers such as:
- Fan coils for heating and drying of structures or commodities such as grain lumber or hay.
- Explosion proof fancoils for use in hazardous locations
- Multi-circuit line heat exchange hose or tubing for ground thawing, concrete curing, snow melting and slab heating
- Helical heat transfer coils for heating large tanks and reservoirs of water or other various liquids
- Plate heat exchangers for heating various contained liquids or extending upward capability in high rise buildings
- Custom hydronic heat exchange accessories and applications
The CHH gas-fired units can be equipped with either of 2 burners: one is dedicated for natural gas and the other for propane gas. Pumping and combustion control is achieved with electrical components requires a 120 volt, 20 amp, 3 wire grounding circuit and is designed for consistently efficient outdoor operation.
| CHH 300 CAPACITIES | Diesel | Propane | Natural Gas |
|---|---|---|---|
| Heat (at specific conditions) | Up to 500,000 cubic ft | Up to 500,000 cubic ft | Up to 500,000 cubic ft |
| Thaw | 9,000 sq ft (4500′ hose) | 9,000 sq ft (4500′ hose) | 9,000 sq ft (4500′ hose) |
| Cure | 13,500 sq ft (4500′ hose) | 13,500 sq ft (4500′ hose) | 13,500 sq ft (4500′ hose) |
| Frost Prevention | 9,000 sq ft (4500′ hose) | 9,000 sq ft (4500′ hose) | 9,000 sq ft (4500′ hose) |
The CHH 980 is a CSA/UL certified system that is designed to operate on multiple fuel sources. As a fuel-burning appliance, it is designed to heat fluid “on demand” and provide pumped circulation of the fluid for use in various portable hydronic applications. This unit provides a central source of hot “heat transfer fluid” (HTF) for use with dependent heat exchangers such as:
- Fan coils for heating and drying of structures or commodities such as grain lumber or hay.
- Explosion proof fancoils for use in hazardous locations
- Multi-circuit line heat exchange hose or tubing for ground thawing, concrete curing, snow melting and slab heating
- Helical heat transfer coils for heating large tanks and reservoirs of water or other various liquids
- Plate heat exchangers for heating various contained liquids or extending upward capability in high rise buildings
- Custom hydronic heat exchange accessories and applications
The CHH gas-fired units can be equipped with either of 2 burners: one is dedicated for natural gas or propane gas, the other for light oil/diesel. It is equipped to burn either natural gas or propane gas with the same burner by merely readjusting the manifold gas pressure. Pumping and combustion control is achieved with electrical components and requires a 120/240 volt, 40 amp, 4 wire grounding circuit and is designed for consistently efficient outdoor operation.
| CHH 980 CAPACITIES | Diesel | Propane | Natural Gas |
|---|---|---|---|
| Heat (at specific conditions) | Up to 1, 300, 000 cubic ft | Up to 1, 300, 000 cubic ft | Up to 1, 300, 000 cubic ft |
| Thaw | 18,000 sq ft (9000′ hose) | 18,000 sq ft (9000′ hose) | 18,000 sq ft (9000′ hose) |
| Cure | 27,000 sq ft (9000′ hose) | 27,000 sq ft (9000′ hose) | 27,000 sq ft (9000′ hose) |
| Frost Prevention | 18,000 sq ft (9000′ hose) | 18,000 sq ft (9000′ hose) | 18,000 sq ft (9000′ hose) |
The HHS PowerHeat Hydronic Max is a CSA/UL certified system that is designed to operate on multiple fuel sources. As a fuel-burning appliance, it is designed to heat fluid “on demand” and provide pumped circulation of the fluid for use in various portable hydronic applications. This system provides a central source of hot “heat transfer fluid” (HTF) for use with dependent heat exchangers such as:
- Fan coils for heating and drying of structures or commodities such as grain lumber or hay.
- Explosion proof fancoils for use in hazardous locations
- Multi-circuit line heat exchange hose or tubing for ground thawing, concrete curing, snow melting and slab heating
- Helical heat transfer coils for heating large tanks and reservoirs of water or other various liquids
- Plate heat exchangers for heating various contained liquids or extending upward capability in high rise buildings
- Custom hydronic heat exchange accessories and applications
This unit is capable of using light oil, diesel fuel, natural gas or propane gas; one burner is dedicated for diesel fuel and a separate burner can be set up to burn either natural gas or propane gas with minimal adjustments. Pumping and combustion control is achieved with electrical components; this unit requires a 115 volt/230 volt, 40 amp, 4 wire grounding circuit and is designed for consistently efficient outdoor operation.
| HYDRONIC MAX CAPACITIES | Diesel | Propane | Natural Gas |
|---|---|---|---|
| Heat (at specific conditions) | Up to 2,000,000 cubic ft | Up to 2,000,000 cubic ft | Up to 2,000,000 cubic ft |
| Thaw | 27,000 sq ft (13,500′ hose) | 27,000 sq ft (13,500′ hose) | 27,000 sq ft (13,500′ hose) |
| Cure | 40,500 sq ft (13,500′ hose) | 40,500 sq ft (13,500′ hose) | 40,500 sq ft (13,500′ hose) |
| Frost Prevention | 27,000 sq ft (13,500′ hose) | 27,000 sq ft (13,500′ hose) | 27,000 sq ft (13,500′ hose) |
